30m Nail sealing tape 48 x 3mm anthracite adhesive

Our nail sealing tape is a one-sided self-adhesive tape that can be applied directly from the roll. It is characterised by permanent, high elasticity. Nail sealing tape 610 is highly adhesive - even at low temperatures. It is particularly suitable for pitched roof constructions, where it prevents moisture and driving rain from penetrating into perforations in the roof underlays and underlay sheets. For example, it is used as a sealing tape against the penetration of moisture between counter battens and roofing membrane.

Data

• Quality:  Cell-closed polyethylene
• Dimensions:  Width:  48 mm; thickness:  3 mm;  length:  30 m
• Volume weight:  30 kg/m³ according to DIN 54320
• Adhesive:  Hot-melt based on rubber, one-sided adhesive
• Tensile strength longitudinal // transverse:  0.42 N/mm² // 0.34N/mm²
• Compression set 22 h/23°C:  8% (24 h after discharge)
• Thermal conductivity min. + 5°C
• Temperature resistant  -30°C to + 80°C
• Thermal conductivity min. + 5°C
• Water vapour permeability WVP = 0.72 g/m²-24 h
• Colour: anthracite
• Storage time: approx. 1 year with cool and dry storage
• Resistance to weathering, ageing, condensation: very good; to solvents and UV radiation: limited

Handling

The self-adhesive coating achieves its best adhesive strength at approx. + 20° C. The roof underlays and substrates to be bonded must be firm and load-bearing, clean, dry, and free of dust and grease. If the roof underlays used are rolled out on a dusty floor for cutting to length, they must be cleaned with a cloth before applying the tape. This also applies if the sheeting is unwound from a vertical spool and the lower edge comes into contact with dust on the floor. Adequate ventilation under the primary covering must be ensured and the maximum exposure to weathering of the nail sealing tapes under the counter battens or in the case of overlaps must not exceed 3 months - i.e. the roof tiles must be installed within 3 months. Care must be taken to ensure an exact fit by means of counter-battening.

Shipping

You may place your order for just one plate alone - we have no minimum order values. In order that you are able to calculate the shipping-costs, we are going to inform you in the following about, how many plates of this type fit maximum in one package. You may order various mixed plates. Also - the shop automatically calculates the appropriate shipping price for you.

Up to 25 of these products fit in each package .More information.